HP 140

hp photosmart 140 series
chapter 1
16
7 Close the print cartridge door.
After you install a new print cartridge, the message L
OAD PLAIN PAPER THEN
PRESS OK appears on the printer’s LCD screen. When you press the OK
button, the printer automatically calibrates the new print cartridge and
prints a calibration page to confirm that the print cartridge is correctly
installed and functioning properly. For more information, see calibrate the
print cartridge on page 39.
remove the print cartridge
To remove the print cartridge:
1 Open the print cartridge door.
2 Push down and pull outward on the top of the print cartridge to unsnap it
from the print cartridge cradle.
3 Remove the print cartridge from the printer.
If there is ink in the print cartridge, place the cartridge in a print cartridge
protector for storage. If the print cartridge is empty, discard or recycle the
print cartridge. For information about recycling print cartridges, go to
www.hp.com/recycle.