HP 15-bw0 Series User Manual

3. Pull the hard drive assembly away from connector to remove it (3).
4. To remove the hard drive bracket, remove the two Phillips PM3.0×3.0 screws (1) that secure the bracket
to the hard drive.
5. Remove the hard drive bracket from the hard drive (2).
6. To remove the hard drive connector board, disconnect the cable from the board (1).
7. Remove the two Phillips PM2.0×3.0 screws (2) that secure the hard drive board to the computer.
Component replacement procedures 51

HP 15-bw0 Series Specifications

General

Brand	HP
Model	15-bw0 Series
Category	Laptop
Language	English