Speakers
Description Spare part number
Speakers (includes left and right speakers and cable) 926892-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 35).
5. Remove the battery (see Battery on page 37).
6. Remove the system board (see System board on page 52).
To remove the speakers:
1. Remove the display cable from the right speaker (1).
2. Remove the cable from its routing path along the bottom of the computer (2), and then remove the
speakers from the computer (3).
Reverse this procedure to install the speakers.
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
