8. If you need to remove the display cable:
■
Peel the cable o the inside of the display rear cover (1).
The display cable is available as the following spare part numbers:
N13331-001: 144 Hz models
N13332-001: Standard models
9. If you need to remove the WLAN antennas:
a. Release the wireless antenna cables from the retention clips (1) on the display back cover.
b. Peel the wireless antennas o the display rear cover (2). (The antennas are attached with double-
sided adhesive.) The wireless antennas are available using spare part number N13325-001 for
models with a 300 nit panel and N13326-001 for models with a 250 nit panel.
Display assembly
61
To Next Page
Loading...
