HP 1901A - User Manual

Errata
Title & Document Type: 1901A Pulse Generator Operating and Service Manual
Manual Part Number: 01901-90901
Revision Date: May 1969
About this Manual
We’ve added this manual to the Agilent website in an effort to help you support your
product. This manual provides the best information we could find. It may be incomplete
or contain dated information, and the scan quality may not be ideal. If we find a better
copy in the future, we will add it to the Agilent website.
HP References in this Manual
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, life sciences, and chemical analysis
businesses are now part of Agilent Technologies. The HP XXXX referred to in this document is
now the Agilent XXXX. For example, model number HP8648A is now model number Agilent
8648A. We have made no changes to this manual copy.
Support for Your Product
Agilent no longer sells or supports this product. You will find any other available
product information on the Agilent Test & Measurement website:
www.agilent.com
Search for the model number of this product, and the resulting product page will guide
you to any available information. Our service centers may be able to perform calibration
if no repair parts are needed, but no other support from Agilent is available.

Summary

SECTION I GENERAL INFORMATION

1-1. INSTRUMENT DESCRIPTION.

Detailed explanation of the Model 1901A mainframe's features and purpose.

SECTION II INSTALLATION

2-1. INITIAL INSPECTION.

2-4. PREPARATION FOR USE.

SECTION III OPERATION

3-3. CONTROLS AND CONNECTORS.

Explanation of the mainframe's operating controls and various connectors.

3-5. SPECIAL OPERATING CONSIDERATIONS.

SECTION IV PRINCIPLES OF OPERATION

4-3. BLOCK DIAGRAM DESCRIPTION.

Explanation of the mainframe's block diagram, illustrating signal and power flow.

4-6. MAIN CHASSIS CIRCUITRY.

Details on the mainframe's circuitry, including power supply configurations and components.

SECTION V PERFORMANCE CHECK AND ADJUSTMENTS

5-3. PERFORMANCE CHECK.

Outlines the process for verifying the instrument's operational performance.

5-6. PROCEDURE.

Step-by-step instructions for conducting performance checks and adjustments.

5-11. ADJUSTMENT PROCEDURE.

Step-by-step guide for adjusting the instrument's power supply voltages.

SECTION VI REPLACEABLE PARTS

6-4. ORDERING INFORMATION.

SECTION VIII SCHEMATICS AND TROUBLESHOOTING

8-3. SCHEMATIC FEATURES.

8-6. COMPONENT IDENTIFICATION.

8-11. TROUBLESHOOTING.

Guidance on diagnosing and resolving instrument malfunctions.

HP 1901A Specifications