HP 81110A - User Manual

HP 81110A 165/330 MHz,
HP 81104A 80 MHz
Pulse/Pattern Generators
+
Quick Start
Guide

Summary

Front Panel Display and Softkeys

Chapter 1 Installation & Safety Requirements

Initial Inspection

Inspect shipping container for damage and verify instrument contents.

Power Requirements

Details AC power requirements, fuse types, and auto selection.

Ventilation Requirements

Specifies clearance for cooling fans and airflow to prevent overheating.

Safety Information

Covers safety precautions, warnings, and symbols for instrument operation.

Chapter 2 Introduction

General Information

Provides an overview of the instrument's features and capabilities.

User Interface Concept

Explains the instrument's display and front panel control concept.

Available Operating;Trigger Modes

Setting Timing Parameter Formats and Values

Setting Level Parameter Formats and Values

Editing Pattern

Setting Limits

An Overview of the Front and Rear Panel

Examples

Setting up a Clock Signal

Setting up a Pulse Signal

Setting Up a Serial Data Stream Signal

Setting Up an Edge-displacement Signal

Setting Up a Dual Clock Signals

Setting Up a Burst Signal

HP 81110A Specifications