HP 1905 Series - Configuration; Build To Order; Configuration Rules; Transceiver Options

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 1905-24 Switch JD990A
24 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 9
HP 1905-48 Switch JD994A
48 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 9
HP 1905-24-PoE Switch JD992A
24 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 9
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X120 1G SFP LC LX Transceiver JD119B
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC SX Transceiver J4858C
Note 9 Localization required. (See Localization Menu for list.)
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X120 1G SFP LC LX Transceiver JD119B
Internal Power Supplies
No Power supplies
Cables
QuickSpecs
HP 1905 Switch Series
Configuration
DA - 13680 North America — Version 14 — November 5, 2013 Page 3