Need help?Do you have a question about the HP 1920-24G and is the answer not in the manual?
General| Model | HP 1920-24G |
|---|---|
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| MAC Address Table Size | 8000 entries |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Storage Temperature | -40°C to 70°C |
| Management | Web-based |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (noncondensing) |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z |
| Ports | 24 x 10/100/1000 + 4 x SFP |
| Dimensions (W x D x H) | 440 x 240 x 44 mm |
| Weight | 2.8 kg |
Advisories to prevent equipment damage or bodily injury during installation and operation.
Guidelines for selecting a suitable indoor environment for switch installation.
Maintaining optimal temperature and humidity levels for reliable switch operation.
Ensuring the equipment room is free of dust and harmful gases to prevent corrosion.
Measures to prevent adverse effects of EMI on the switch's performance.
Step-by-step guide for mounting the switch in a standard 19-inch rack using brackets.
Steps to prepare the environment for initial switch configuration.
Connecting the console cable and configuring terminal parameters for access.
Steps for powering on the switch and verifying its status.
Checks to perform after powering on the switch for correct operation.
Information on how to contact HP and access support resources.
Explanation of symbols and conventions used in the document.
Illustrations of various HP 1920 switch models.
Details on chassis dimensions, weights, ports, and environmental specs.
Information on AC/DC input voltage, power consumption, and RPS compatibility.
Explanation of the Power, Copper port, Fiber port, and RPS LEDs.
To Next Page