Do you have a question about the HP 1820 and is the answer not in the manual?
Power Supply | Internal |
---|---|
Ports | 8, 24, 48 RJ-45 10/100/1000 ports; depending on model |
Management | Web-managed |
Switching Capacity | 16 Gbps (8-port), 52 Gbps (24-port), 104 Gbps (48-port) |
Forwarding Rate | 11.9 Mpps (8-port), 38.7 Mpps (24-port), 77.4 Mpps (48-port) |
Mounting | Rack-mountable |
Jumbo Frame Support | Yes |
Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Details on connecting the switch to a network and configuring its IP address for management.
Covers logging into the web interface, its layout, and common navigation elements.
Configuration of network interface settings like IP address, subnet mask, and gateway.
Steps to configure the switch's system clock, time zone, and daylight saving time.
Managing port settings, viewing operational status, and link speed.
Explains STP operation, versions, and configuration for loop prevention.
Viewing existing VLANs, adding new VLANs, and assigning names.
Assigning ports to VLANs and configuring tagging settings.
Aggregating multiple links into a single logical trunk for fault tolerance and load sharing.
Configuring LLDP transmit/receive modes and global parameters.
Viewing information about local and remote devices using LLDP.
Configuring LLDP-MED for enhanced features like auto-discovery and location services.
Overview of PoE support, port capabilities, and global power management modes.
Configuring ports for PoE, priority, and power supply schedules.
Configuring storm control and auto DoS protection mechanisms.
Enabling secure HTTP sessions using SSL certificates for management.
Enabling Efficient Ethernet (EEE) to reduce port power consumption.
Managing logs, performing ping tests, and rebooting the switch.
Restoring factory defaults, viewing support files, and checking the MAC table.
Changing passwords, backing up configurations, and updating switch software.
Managing dual software images for active and backup configurations.