HP OfficeConnect 1920S Series

HPE OfficeConnect 1920S Switch Series Quick Setup
Guide and Safety/Regulatory Information
Applicable products
HPE OfficeConnect 1920S 8G Switch JL380A
HPE OfficeConnect 1920S 24G 2SFP Switch JL381A
HPE OfficeConnect 1920S 48G 4SFP Switch JL382A
HPE OfficeConnect 1920S 8G PPoE+ 65W Switch JL383A
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch JL384A
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W Switch JL385A
HPE OfficeConnect 1920S 48G 4SFP PPoE+ 370W Switch JL386A
HPE OfficeConnect 1920S 8G 2SFP PoE+ 185W Switch JL582A
HPE OfficeConnect 1920S 24G 2SFP PoE+ 185W Switch JL583A
HPE OfficeConnect 1920S 48G 4SFP PoE+ 370W Switch JL584A
Use only supported HPE Aruba SFP transceivers
Non-HPE Aruba SFP transceivers are not supported. Use of supported HPE Aruba products ensures that your network
maintains optimal performance and reliability. If you require additional transceivers, contact an HPE Aruba sales
representative or an authorized reseller. For more information, see the latest edition of the Installation and Getting Started
Guide for your switch at http://www.hpe.com/networking/ResourceFinder.
Installation Precautions
WARNING:
• Adequately secure the rack or cabinet to prevent it from becoming unstable, tilting, or falling. Mount devices
installed in a rack or cabinet as low as possible, with the heaviest devices at the bottom, and progressively lighter
devices above.
• Do not wall-mount any switch without checking for restrictions in the Installation and Getting Started Guide at
http://www.hpe.com/networking/ResourceCenter. Wall-mount the switch with network ports facing up or down
(away from or toward the floor). Do not wall-mount the switch with the ventilation holes facing up or down.
*5200-4911*
©
Copyright 2017, 2018, Hewlett Packard Enterprise Development LP
Part Number: 5200-4911
Published: March 2018
Edition: 1, Printed in China

HP OfficeConnect 1920S Series Specifications

General

Model	HP OfficeConnect 1920S Series
Switch Type	Managed
Layer	Layer 2
MAC Address Table Size	16, 000 entries
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	8, 24, or 48 ports
Management	Web GUI
Jumbo Frame Support	Up to 9, 216 bytes
VLAN Support	Yes (up to 256 VLANs)
Layer 2 Features	Spanning Tree, Link Aggregation
Weight	Varies by model
Power Consumption	Varies by model
Humidity	15% to 95% non-condensing
Uplink Ports	2 or 4 SFP ports

Summary

Applicable Products

Installation Precautions

Installing a 1920 S Switch

Prerequisites

Procedure

Mounting the Switch

Rack Mounting

How to mount the switch in a rack using provided brackets and screws.

Table or Desktop Mounting

How to mount the switch on a table or desktop using self-adhesive pads.

Wall or Under-table Mounting

Instructions for wall or under-table mounting, including specific screw types and placement.

Configuring the Switch

Network Configuration and Access

Steps to configure PC, connect to switch, and access web interface via browser.

Power Cords and Adapters

Regulatory and Safety Information

Regional Safety and Compliance

Brazil Contact and Safety

Safety warnings and contact information for Brazil.

RussiaBelarusKazakhstanCEE Safety

Safety compliance information for Russia, Belarus, Kazakhstan, and CEE regions.

China Altitude Warning

Warning regarding operating altitude limits in China.

Japan Power Cord and VCCI Class A

Specific warnings for Japan regarding power cords and VCCI Class A compliance.

Korea EMC Class A Statement

EMC Class A statement for Korea for business use.

European Community Compliance

Support and Documentation

Manufacturer and Local Representative Info

Information for manufacturer and local representative.

OfficeConnect Support Portal

Link to support and warranty information for small businesses.

Documentation Feedback

Instructions for providing feedback on the documentation.