HP OfficeConnect 1850 6XGT 2XGT/SFP

HPE OfficeConnect 1850 Switch
Series Quick Setup Guide and
Safety/Regulatory Information
Abstract
Use this guide to assist in the basic set-up of the following HPE 1850 switches:
HPE OfficeConnect 1850 6XGT 2XGT/SFP+ Switch (JL169A)
nl
HPE OfficeConnect 1850 24G 2XGT Switch (JL170A)
nl
HPE OfficeConnect 1850 48G 4XGT Switch (JL171A)
nl
HPE OfficeConnect 1850 24G 2XGT PoE+ 185W Switch (JL172A)
nl
HPE OfficeConnect 1850 48G 4XGT PoE+ 370W Switch (JL173A)
*5200-0093*
Part Number: 5200-0093
Published: May 2016
Edition: 1
6HPQSGEN.01G
Printed in China

HP OfficeConnect 1850 6XGT 2XGT/SFP Specifications

General

Brand	HP
Model	OfficeConnect 1850 6XGT 2XGT/SFP
Category	Switch
Language	English

Summary

Installation and Safety Precautions

Setting up the switch

Unpack and Check Parts

Prepare for Installation

Power On and Self-Test Verification

Instructions for powering on the switch and verifying the completion of the self-test procedure.

Mount the switch

Procedures for rack mounting and table/desktop mounting.

Initial Switch Configuration Example

SFPSFP+ Installation Notes

Genuine HPE Aruba SFPSFP+ Transceiver Usage

Guidelines for using only genuine HPE Aruba SFP/SFP+ transceivers for optimal performance.

Hot Swapping SFPSFP+ Transceivers

Instructions for removing and installing SFP/SFP+ transceivers while the switch is powered on.

SFPSFP+ Port Configuration Matching

Safety and Environmental Specifications

Electrical Specifications (Non-PoE)

Rated AC voltage, max AC current, and power frequency for non-PoE models.

Electrical Specifications (PoE+)

Environmental Operating Conditions

Safety Standards Compliance