HP 1910 Series

5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 1910-24G Switch (JE006A)
Ports 24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical characteristics Dimensions 17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
Weight 6.8 lb (3.08 kg)
Memory and processor Module ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance 100 Mb Latency < 5 µs
1000 Mb Latency < 5 µs
Throughput up to 41.7 million pps
Routing/Switching
capacity
56 Gbps
Routing table size 32 entries
MAC address table size 8192 entries
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, non-condensing
Non-operating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
10% to 95%, non-condensing
Electrical characteristics Frequency 50/60 Hz
Voltage 100-240 VAC
Maximum power rating 31.5 W
QuickSpecs
HP 1910 Switch Series
Technical Specifications
DA - 13677 Worldwide — Version 12 — December 9, 2013 Page 16