8
Leave as 0.0.0.0 if this option is not needed.
h. Domain Name
i. Enter a domain name
Default Setting : None
Recommended Setting : Network Dependent
20) Skip Provisioning Server.
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
This option is used in Enterprise mode when an Intel AMT Setup and Configuration
(Provisioning) server is available. This option will disappear once SMB mode is set in step 21.
21) Go into Provision Model.
a. Change to Small Business
Default Setting : Enterprise
Recommended Setting : Small Business
i. Select Y.
This option is a toggle, the next time it is accessed the opposite setting is
prompted.
Notice that the Provisioning Server and Set PID and PPS options are no longer available
once the system is in Small Business mode. These options are used in Enterprise Mode.
b. Return to previous menu.
22) Skip Un-Provision.
This option is to return the system to factory defaults. See the Return to Default section for
more information on unprovisioning.
23) Check SOL/IDE-R.
a. A message window telling the user that the system resets after configuration changes
will appear.
i. Select Y.
b. Username and Password
Default Setting : Enabled
Recommended Setting : Enabled
i. Select Enabled.
This option allows users and passwords to be added from the WebGUI. If it is
disabled, then only the administrator has MEBx remote access.
c. Serial Over LAN
To Next Page
Loading...
Need help?
General
