HP 2530p - EliteBook - Core 2 Duo 2.13 GHz - Page 112

Select To do this
Port Options (all are enabled by default) NOTE: All port options are enabled by default.
●
Enable/disable the Smart Card slot.
●
Enable/disable the ExpressCard slot.
● Enable/disable the serial port.
● Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
AMT Options NOTE: All AMT options are disabled by default.
●
Enable/disable Firmware Verbosity.
●
Enable/disable AMT Setup Prompt (CTRL-P).
● Enable/disable USB Key Provisioning Support.
● Enable/disable Unconfigure AMT on Next Boot.
●
Enable/disable Terminal Emulation Mode.
●
Enable/disable Firmware Progress Event Support.
● Enable/disable include TYPE-131 in SMBIOS.
Set Security Level Change, view, or hide security levels for all BIOS menu
items.
Restore Security Defaults Restore the default security settings.
104 Chapter 5 Computer Setup