Controlling the webcam focus (select models only)
You can control the webcam focus by selecting Start > All Programs > HP Webcam Application >
HP Webcam > Settings > Options.
The following focus options are available:
●
Normal—The factory setting of the camera is appropriate for normal photography. This range
extends from several feet in front of the lens to infinity.
●
Macro—The close-up focus setting is for taking photos and capturing video at a very close range
(select models only).
NOTE: The Bizcard reader (select models only) operates on the macro setting.
Controlling the webcam focus (select models only) 25
To Next Page
Loading...
