Table 7-18 Paper pick-up feeder assembly for Tray 2
Ref Description Part number Qty
* Not set up as a service part
PAPER PICKUP FEEDER ASS'Y * 1
1 GUIDE, REGISTRATION * 1
2 PLATE, REG. GROUNDING, 1 * 1
3 PLATE, REG. GROUNDING, 2 * 1
4 FLAG, SENSOR * 1
5 SPRING, TORSION * 1
6 COVER, SENSOR, TOP * 1
7 GUIDE, PRE-TRANSFER * 1
8 ROLLER, REGISTRATION DRIVE * 1
9 BUSHING * 2
10 SHUTTER, REGISTRATION * 1
11 SPRING, TORSION * 1
12 ROLLER, REGISTRATION, A * 2
13 ROLLER, REGISTRATION, B * 2
14 ROLLER, REGISTRATION, C * 2
15 BUSHING * 1
16 BUSHING * 1
17 ROLLER, PAPER PICKUP RC1-5440-000CN 1
18 HOLDER, PAPER WIDTH SENSOR * 1
19 FLAG, PAPER WIDTH SENSOR * 1
20 SPRING, TORSION * 1
21 RESISTOR, 400 OHM, 0.5W * 1
22 COVER, PICKUP FEED FRAME * 1
23 SPRING, TENSION * 2
24 PHOTO INTERRUPTER (SENSOR) * 4
25 PAPER PICKUP DRIVE ASS'Y * 1
26 FEEDER UNIT CABLE * 1
501 SCREW, TAPPING,TRUSS HEAD,M4X8 * 4
A01 FRAME, PAPER PICKUP FEEDER * 1
A02 SHAFT, REGISTRATION ROLLER * 1
A03 COVER, PICKUP FEED FRAME * 1
A04 SHEET, SCRAPER, 1 * 1
A05 SHEET, SCRAPER, 2 * 1
ENWW Input devices 197
To Next Page
Loading...