Software
This section contains information about the software used with the HP Color LaserJet 2600n printer.
Supported drivers
Software and supported operating systems
For easy printer setup and access to the full range of printer features, HP strongly recommends that
you install the software that is provided. Not all software is available in all languages. See the Getting
Started Guide for installation instructions, and see the Readme file for the latest software information.
The most recent drivers, additional drivers, and other software are available from the Internet and
other sources.
The printer supports the following operating systems:
■ Microsoft® Windows® 98 Second Edition and Windows Millennium Edition (Me) (Add Printer
installation)
■ Microsoft® Windows® 2000 and Windows XP
■ Microsoft® Windows® Server 2003
■ Macintosh OS X v10.2 and later
The following table lists the software that is available for your operating system.
Table 1-2 HP Color LaserJet 2600n printer software
Feature Windows 98 Second
Edition, Me
Windows 2000 and XP Macintosh OS X v10.2 and
later
Windows Installer
Windows printer driver
HP Toolbox software
Macintosh Installer
Macintosh printer drivers
Software for Windows
When you install the software for Windows, you can directly connect the printer to a computer by
using a USB cable or you can connect the printer to the network by using HP built-in networking. See
the Getting Started Guide for installation instructions, and see the Readme file for the latest software
information.
The following software is available to all users of the printer, whether you connected the printer
directly to a computer by using a USB cable, or to the network through the HP built-in networking
internal print server.
ENWW Software 11
To Next Page
Loading...