7 Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
8 Firmly close the front door.
9 Turn on the printer. After a short time, the control panel should display Ready.
NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages: Incorrect yellow, Incorrect magenta,
Incorrect cyan, Incorrect black.
10 Installation is complete. Place the used print cartridge in the box in which the new cartridge
arrived. See the enclosed recycling guide for recycling instructions.
11 If you are using a non-HP print cartridge, check the printer control panel for further instructions.
For more information about using non-HP print cartridges, see
HP policy on non-HP supplies.
NOTE When replacing or changing a black print cartridge, a cleaning page will
automatically print. This helps prevent speckles on the front or back of printed documents.
A cleaning page can also be generated using the control panel or the HP Toolbox. For
information, see
To clean the printer at the printer or To clean the fuser using HP Toolbox.
ENWW Install input devices 29
To Next Page
Loading...