HP 2600n - Color LaserJet Laser Printer - Page 74

Calibrating the printer at the control panel
Use the following steps to calibrate the printer using the printer control panel.
1
Use the
(L EFT ARROW ) or the (R IGHT ARROW ) button to select SYSTEM SETUP and then press
(S ELECT ).
2
Use the
(L EFT ARROW ) or the (R IGHT ARROW ) button to select PRINT QUALITY and then press
(S ELECT ). CALIBRATE COLOR will display on the control panel.
3
Press
(S ELECT ).
4
Use the
(L EFT ARROW ) or the (R IGHT ARROW ) button to select CALIBRATE NOW and then
press
(S ELECT ).
5
Press
(S ELECT ) to start the calibration.
60 Chapter 4 Operational theory ENWW