HP 2710p - Compaq Business Notebook Maintenance And Service Guide

2. Remove the two Torx T8M2.0×5.0 screws that secure the rear plastic bezel to the computer.
3. Turn the computer right-side up, with the rear panel toward you.
4. Open the computer to an upright position.
5. Remove the rear plastic bezel by pulling it away from the computer.
Reverse this procedure to install the rear plastic bezel.
Component replacement procedures 53

HP 2710p - Compaq Business Notebook Specifications

General

Brand	HP
Model	2710p - Compaq Business Notebook
Category	Laptop
Language	English