HP 2710p - Compaq Business Notebook Maintenance And Service Guide

Remove the speaker:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the speaker cable (2) from the clip built into the base enclosure.
3. Remove the Phillips PM2.0×6.0 screw (3) that secures the speaker to the base enclosure.
4. Remove the speaker (4) from the base enclosure.
Reverse this procedure to install the speaker.
Component replacement procedures 61

HP 2710p - Compaq Business Notebook Specifications

General

Brand	HP
Model	2710p - Compaq Business Notebook
Category	Laptop
Language	English