HP 3000 Series Installation And Service Manual

Configuring MP E:
THE CONFIGURATION DIALOGUE
The following instructions deal only with configuring an INf.
The complete configuration dialogue is given in the System
Manager I System Supervisor Reference Manual.
To beg in, log onto the sys tern, define the output files, anc
initiate a SYSDUIViP as shown:
NO'I'E
Where it is necessary tc dis ting ui sh
user input from computer output, the
input is underl j ned.
: HELLO J.V.IANP~GER. SYS
:FILE T;DEV=TAPE
:FILE L;DEV=LP
: S YSDL ~.lP *T , * L
Step No. Prompt and Response
1. ANY CHANGES? YES
2. SYSTEM ID=HP 32002 v.uu.ff? return
3. MEMORY SIZE? return
3.1 I/O CONFIGURATIOH CHAHGES? YES
3.2 LIST 1/0 DEVICES? YES or NO
3.3 LIST CS DEVICES? YES or NO
3. 4 HIGHESrr ORT = xx.?
xx is the current highest hardware device address that
can be assigned. Press RETURN if xx is satisfactory.
Othe~wise, enter a higher DRT number.
Configuration of individual devices begins here.
3.5 LOGICAL DEVICE#?
Enter the logical device number of the INP.
C-2
JUN 1980

HP 3000 Series Specifications

General

Brand	HP
Model	3000 Series
Category	Desktop
Language	English