The printer returns to the Ready state after printing the print-quality-troubleshooting pages. If you see
print-quality defects on the print-quality-troubleshooting pages, calibrate the printer. See
Calibrating the
printer. If defects continue to appear, go to the appropriate Web site for your printer:
●
www.hp.com/go/printquality/clj3000
●
www.hp.com/go/printquality/clj3800
Calibrating the printer
Calibration is a printer function that optimizes print quality. If you experience any print-quality problems,
calibrate the printer.
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight PRINT QUALITY, and then press .
4. Press
to highlight FULL CALIBRATE NOW, and then press .
172 Chapter 8 Problem solving ENWW
To Next Page
Loading...