HP 300X - JetDirect Print Server

38 TCP/IP Configuration ENWW
Port and Banner
Page Example
port:2
banner:0
For multiport Jetdirect print
servers, ‘port’ specifies the port
that you want to enable or disable
a banner page. (In this example,
disable banner page on port 2.)
The default port is port 1.
Set Community
Name Example
set-cmnty-
name:
my_network
where set-cmnty-name
identifies the parameter and
my_network specifies the name
you want to set.
The Set Community Name
parameter is a network
management security mechanism
that enables external network
management entities to set internal
print server management (mib)
values. The name can be from 1 to
32 alpha and numeric characters
and can include the underscore (_)
symbol.
DHCP Parameter
Example
dhcp-config:
1
where dhcp-config: identifies
the Dynamic Host Configuration
Protocol. (1 enables, 0 disables)
Host Name
Example (to
assign or change
a name)
host-name:
MY_PRINTER
where MY_PRINTER is an
alphanumeric string and must be
all uppercase letters.
Table 3.3 Telnet Configuration Parameter Examples (2 of 2)