ENWW Troubleshooting the HP Jetdirect Print Server 65
Figure 6.2 Ethernet Configuration Page
(External Single Port Print Servers)
7 Apple EtherTalk status
information (Table
7.7)
(Ethernet only) If the AppleTalk protocol
is working properly, or if it is enabled.
Use NET and NODE to verify the printer
is communicating correctly on the
network. ZONE verifies you selected
the correct printer. P2 (below READY)
indicates you are using the Phase 2
EtherTalk protocol, which should be the
same on your printer as on your Mac
OS.
8 SNMP Messages (Table
7.8)
Provides SNMP community name
status.
Table 6.1 External Print Server (2 of 2) Configuration Pages
Item Description Troubleshooting Information
To Next Page
Loading...
Need help?
General
