HP 3336B User Manual

Installation
2-30. STORAGE AND SHIPMENT.
2-31. Environment.
2-32. The instrument should be stored in a clean, dry environment. The following en-
vironmental limitations apply to both storage and shipment:
Temperature — 50°C to + 65°C
Relative Humidity 95% at 40°C
Altitude 15,300 meters
(50,000 feet)
2-33. Instrument Identification.
2-34. If the instrument is being returned to Hewlett-Packard for servicing, attach a tag in-
dicating the type of service required, return address, model number, and full serial number.
In any correspondence, refer to the instrument by model number and full serial number.
2-35. Packaging.
2-36. Original Packaging. If the original packaging has been retained, pack the instrument
in the same manner as it was received. Be sure to seal the shipping container securely. Also,
mark the container FRAGILE to assure careful handling.
2-37. Other Packaging. The following general instructions should be used for repackaging
with commercially available materials.
a. Wrap the instrument in heavy paper or plastic. (If shipping to a Hewlett-Packard of-
fice or service center, attach a tag indicating the type of service required, return address,
model number, and full serial number.)
b. Use a strong shipping container. A double-wall carton made of 250-pound test material
is adequate.
c. Use enough shock-absorbing material (3-to-4 inch layer)around all sides of the instru-
ment to provide firm cushion and prevent movement inside the container. Protect the con-
trol panel with cardboard.
d. Seal the shipping container securely.
e. Mark the shipping container FRAGILE to assure careful handling.
Model 3336A/B/C

HP 3336B Specifications

General

Brand	HP
Model	3336B
Category	Inverter
Language	English