ENWW Safety statements 27
Safety statements
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
has implemented regulations for laser products manufactured since August 1, 1976. Compliance
is mandatory for products marketed in the United States. The printer is certified as a “Class 1”
laser product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since
radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape during any phase of normal user operation.
WARNING! Using controls, making adjustments, or performing procedures other than those specified in this
service manual may result in exposure to hazardous radiation.
Toner safety
Hewlett-Packard encourages responsible disposal of HP LaserJet printer supply items through its
Environmental Collection Program. For details on this program, see the recycling instruction guide
enclosed with each supply item.
Note In case of toner spills, skin and clothing are best cleaned by removing as much toner as possible
with a dry tissue, then washing with cold water. Hot water causes toner to permanently set into
clothing.
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
«Conforme â la classe B des normes canadiennes de compatibilitê êlectromagnêtiques.
«CEM».»
EMI statement (Korea)
Figure 1-13 EMI statement for Korea
To Next Page
Loading...
