Need help?Do you have a question about the HP Aruba 3810M Series and is the answer not in the manual?
General| Model | HP Aruba 3810M Series |
|---|---|
| Layer | Layer 3 |
| Port Types | 10/100/1000BASE-T, SFP, SFP+ |
| Stacking | Yes |
| Power over Ethernet (PoE) | IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) available on select models |
| Management | Aruba Central, Command-line interface (CLI), SNMP |
| Features | Advanced Layer 3 routing, QoS |
| Power Supply | Redundant power supply options |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Power Consumption | Varies by model |
| Security Features | IEEE 802.1X, RADIUS, TACACS+, SSH, SSL |
| Ports | 24 or 48 x 10/100/1000Base-T, SFP+, or SFP ports (depending on model) |
| Warranty | Limited Lifetime Warranty |
Details the different types of network ports available on the switches and their specifications.
Details the available power supply options and their compatibility with switch models.
Outlines essential safety and environmental precautions before installing the switch.
Explains how to confirm the switch is operating properly after initial power-up.
Provides instructions for installing the optional stacking module into the switch.
Details the procedure for installing a Flex Port module into the switch.
Describes methods for mounting the switch in a rack, cabinet, or on a surface.
Steps for connecting the switch to an AC power source for operation.
Steps to connect a management console for initial switch configuration.
Instructions on connecting network cables to switch ports for network access.
Explains different stacking topologies and connection methods for switches.
Outlines essential initial configuration steps for network management.
Step-by-step guide for configuring the switch via a console port connection.
Explains how to manage the switch remotely using its IP address.
Provides general advice and common checks for resolving switch issues.
Explains how to interpret LED patterns to diagnose switch problems.
Guide on resetting the switch to its original factory default settings.
To Next Page
