HP ARUBA 2930M 40G 8 SMRT RTE POE+ 1S User Manual

Product End-of-Life Disassembly Instructions
Product Category
: Networking
Marketing Name / Model
[List multiple models if applicable.]
ARUBA 2930M 40G 8 SMRT RTE POE+ 1S SWCH (JL323A)
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Power Cord and Console RJ45 Cable
2
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
MF877-00 Page 1
Template Revision B, 18-Nov-2016
HPE instructions for this template are available at MF877-01

HP ARUBA 2930M 40G 8 SMRT RTE POE+ 1S Specifications

General

Model	JL322A
Switching Capacity	176 Gbps
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C (32°F to 113°F)
PoE Power Budget	1440 W
Operating Humidity	15% to 95% non-condensing
Stacking	Supported

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

PCB/PCA with a surface area greater than 10 sq cm.

Batteries

All types of batteries, including alkaline and lithium coin/button styles.

Mercury-containing components

Components containing mercury, e.g., lamps, display backlights, scanners.

Liquid Crystal Displays (LCD)

LCDs with a surface greater than 100 sq cm, including gas discharge lamps.

Capacitors / condensers (Containing PCB/PCT)

Capacitors/condensers containing PCB/PCT or measuring > 2.5 cm.

Plastics containing Brominated Flame Retardants

Plastics weighing > 25 grams, excluding PCBs/PCAs.

Components and parts containing toner and ink

Includes cartridges, print heads, tubes, vent chambers, and service stations.

Tools Required for Disassembly

Torque Driver and Bits

Specifies the torque driver and bit sizes needed for disassembly.

Product Disassembly Process

Step-by-Step Removal Instructions

Lists sequential steps for removing components and materials requiring selective treatment.

Optional Disassembly Graphic

Provides a visual illustration to identify components requiring selective treatment.