Figure 23 RJ-45 to DB-9 pinouts
Table 19 Mapping of RJ-45 to DB-9
DB-9 (Signal reference from PC)RJ-45 (Signal reference from Chassis)
CTS81Reserved
DSR62Reserved
RXD23TXD
DCD14Reserved
GND55GND
TXD36RXD
DTR47Reserved
RTS78Reserved
RI9
11. Connect the Network Cables
Connect the network cables, described under “Cabling Infrastructure” (“ 1. Prepare the Installation
Site” (page 31)), from the network devices or your patch panels to the fixed RJ-45 ports on the
switch or to any transceivers installed in the switch.
46 Installing the Switch
To Next Page
Loading...
