To Next PageTo Next Page
Need help?Do you have a question about the HP A5820X Series and is the answer not in the manual?
General| Product Series | A5820X |
|---|---|
| Uplink Ports | Modular (varies by configuration) |
| Management | CLI, Web GUI, SNMP |
| Jumbo Frame Support | Yes |
| Routing Protocol | RIP, OSPF, BGP, IS-IS |
| Operating Temperature | 0°C to 45°C |
| Power Supply | Redundant hot-swappable power supplies |
| Operating Humidity | 10% to 90% non-condensing |
General safety instructions for installation and operation.
Specifies environmental conditions like temperature, humidity, and air quality for the installation site.
Outlines criteria for rack selection and installation to ensure stability and heat dissipation.
Step-by-step instructions for installing the switch into a 19-inch rack.
Procedures for mounting the switch on a workbench.
Essential steps for grounding the switch for electrical safety.
Step-by-step guide for inserting a fan tray into the switch chassis.
Instructions for safely removing a fan tray from the switch.
Installation and removal procedures specific to power supplies for these models.
Installation and removal procedures for power supplies on other A5800/A5820X switch models.
Steps for connecting the switch to an AC power source.
Guidance on connecting various DC power sources like RPS to the switch.
Step-by-step instructions for installing an interface card.
Procedures for safely removing an interface card.
Guide for installing an OAP card into its dedicated OAP card slot.
Instructions for installing an OAP card into an expansion interface card slot.
Steps to install a PoE module into the switch.
Instructions for safely removing a PoE module.
Steps to connect a console cable for initial configuration.
Configuration of terminal emulator settings for console access.
Final checks before powering on the switch.
Information on powering on the switch and changing startup modes.
Covers planning aspects like fabric size, site, topology, and member IDs.
Steps to configure basic IRF settings and connect physical IRF ports.
Procedures to verify the functionality of the configured IRF fabric.
Solutions for console login and Boot ROM password loss.
Troubleshooting steps for fixed and hot-swappable power supply issues.
Troubleshooting for OAP card, PoE module, and fan failures.
Troubleshooting issues with the terminal display during configuration.
Information on how to contact HP for technical support.
Links to documents, websites, and resources for further information.
Details chassis dimensions and weights for various switch models.
Lists the ports and slots available on A5800 and A5820X switch series.
Information on compatibility of interface cards, OAP cards, PoE modules, and power supplies.
Table showing compatible power supply units for each switch chassis.
Matrix indicating compatible fan tray models for different switch chassis.
Table showing compatibility of interface cards with various switch models.
Compatibility information for PoE modules with A5800 switches.
Compatibility data for OAP cards with different switch models.
Compatibility of RPS units with various switch chassis.
Details various ports like Console, Ethernet, SFP, USB, and their specifications.
Explains the meaning and status of various LEDs on the switch for system, power, ports, and modules.
