Need help?Do you have a question about the HP A5500 HI Series and is the answer not in the manual?
General| Switching Capacity | 336 Gbps |
|---|---|
| Forwarding Rate | 252 Mpps |
| QoS | Yes |
| SFP+ Ports | 4 |
| Layer Support | Layer 2/3 |
| Stacking | Yes |
| Management | CLI, Web, SNMP |
| MAC Address Table Size | 32, 000 |
| Routing Protocol | OSPF, RIP, BGP, IS-IS |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (noncondensing) |
| Ports | 48 |
| 10/100/1000Base-T Ports | 48 |
| Jumbo Frames | 9216 bytes |
| Dimensions | 440 x 430 x 44 mm |
Essential safety guidelines for equipment handling and installation to prevent damage and injury.
Step-by-step procedure for mounting the switch securely into a standard 19-inch equipment rack.
Instructions for placing and securing the switch on a stable workbench for operation.
Methods for properly grounding the switch to protect against lightning and EMI.
Procedure for safely installing or replacing the switch's power supply units.
Pre-power checks to ensure correct connections and environmental readiness.
Considerations for planning IRF fabric size, site, topology, and member IDs.
Steps to configure essential settings like master priority and IRF port bindings.
Procedure for physically connecting IRF member switches using specified cables and transceivers.
Methods to verify IRF fabric functionality and connectivity after setup.
Procedures to recover or reset lost console and Boot ROM passwords.
Diagnosing and addressing issues related to power supply unit failures.
To Next Page