HP A5500 HI Series User Manual

27
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 5 Boot menu options
Item Description
1. Download application file to flash Download a software package file to the Flash memory.
2. Select application file to boot Select the software package file to boot.
3. Display all files in flash Display all files in the Flash memory.
4. Delete file from flash Delete files from the Flash memory.
5. Modify BootRom password Modify the Boot ROM password.
6. Enter BootRom upgrade menu Access the Boot ROM update menu.
7. Skip current system configuration
Start the switch with the factory default configuration. This is a
one-time operation and does not take effect at the next reboot. You
use this option when you forget the console login password.
8. Set BootRom password recovery
Disable or enable the Boot ROM password recovery function. By
default, Boot ROM recovery is enabled. You can disable this function
to protect system security.
9. Set switch startup mode
Set the startup mode of the switch to normal (full) mode or fast mode,
as described in “Changing the startup mode.”
0. Reboot Restart the switch.
NOTE:
The system by default has no Boot ROM password. HP recommends that you set a Boot ROM password
immediately after you access the Boot menu.
• If you perform no operation or press a key other than Ctrl + B within one second, the system
automatically starts up when the remaining time becomes zero, and displays the following
information:
Starting to get the main application file--flash:/A5500HI_release.bin!......
...............................................................................
.............................................
The main application file is self-decompressing................................
...............................................................................
...............................................................................

HP A5500 HI Series Specifications

General

Switching Capacity	336 Gbps
Forwarding Rate	252 Mpps
QoS	Yes
SFP+ Ports	4
Layer Support	Layer 2/3
Stacking	Yes
Management	CLI, Web, SNMP
MAC Address Table Size	32, 000
Routing Protocol	OSPF, RIP, BGP, IS-IS
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)
Ports	48
10/100/1000Base-T Ports	48
Jumbo Frames	9216 bytes
Dimensions	440 x 430 x 44 mm