7
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mountin
screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Figure 5 Hardware installation flow
Connect the grounding
cable
Mount the
switch
Start
Connect power cords
Verify the installation
Power on the switch
Install power supplies
Operating properly? Power off the switch
Troubleshoot
No
Yes
Install an interface card?
Install the interface card
Yes
Troubleshoot
Yes
No
End
No
Operating properly?
Install pluggable
modules or cables
To Next Page
Loading...
