EasyManua.ls Logo

HP A5500 HI Series

HP A5500 HI Series
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
0. Reboot
Enter your choice(0-9):
Enter 0 at the prompt. The system reboots in normal (full) startup mode and displays the following
information:
Starting......
********************************************************************************
* *
* HP A5500-48G-4SFP HI Switch with 2 interface Slots BOOTROM, Version 112 *
* *
********************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Creation Date : Jun 17 2011,17:17:50
CPU Clock Speed : 750MHz
Memory Size : 1024MB
Flash Size : 512MB
CPLD Version : 002
PCB Version : Ver.B
Mac Address : 00E058778800
Press Ctrl-B to enter Extended Boot menu...5
In normal (full) startup mode, you must press Ctrl + B within five seconds to enter the Boot menu. If you
perform no operation or press a key other than Ctrl + B within five seconds, the system automatically
starts up and displays the following information:
Starting to get the main application file--flash:/A5500HI_release.bin!......
...............................................................................
.............................................
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
.................Done!
System is starting...
Board checking.......................LSP5LTSUB
Switch chip selftest.......................OK!
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
PHY selftest...............................OK!
CPLD selftest..............................OK!
Please check leds....................FINISHED!
User interface aux0 is available.

Table of Contents

Related product manuals