HP Aruba 3810M Series

Power cord, one of the following:
Aruba 3810M PoE+ Switches
8121-0857Australia8121-0973North America
8121-1265Brazil8121-0941North America high line
8120-5336Europe/South Korea8121-1483South Africa/India
8121-1034China8121-1009Israel
8121-1481Argentina8120-5334United Kingdom/Hong
Kong/Singapore/Malaysia
8120-8389Chile8120-5339Switzerland
8121-0671Thailand/Philippines8120-5340Danish
8121-1511Taiwan 15A8120-5338Japan high line
(JL086A, JL087A)(JL086A, JL087A)
8121-0967Taiwan 10A8120-5342Japan low line
(JL086A)(JL086A)
Power cord, one of the following:
Aruba 3810M Non-PoE+ Switches
8120-4753Japan8120-6869Argentina
8120-6815Switzerland8121-0834Australia/New Zealand
8120-6813South Africa8121-1069Brazil
8121-0974Taiwan8120-6980Chile
8121-0668Philippines/Thailand8120-8707China
8120-6809UK/Hong Kong/Singapore/Malaysia8120-6811Continental Europe/South
Korea
8121-0973US/Canada/Mexico8120-6814Denmark
8121-0941North America high line8121-0780India
8121-1035Israel
Installation Procedures
Summary
1. Prepare the installation site (“ 1. Prepare the Installation Site” (page 31)). Ensure the
physical environment is properly prepared, including having the correct network cabling
ready to connect to the switch and having an appropriate location for the switch. See “
Installation Precautions:” (page 31) for some installation precautions.
NOTE: For steps 2 and 3 below, if an 3810M switch is powered on for the first time without
a stacking module installed, stacking will be disabled and that will be saved in the switch's
running configuration. For more information, see Stacking Information and Topologies.
Installation Procedures 29