ENWW Test pages 433
Test pages
Printing test pages helps you determine whether the printer engine and the formatter are
functioning.
Engine test page
To verify that the printer engine is functioning, print an engine test page. Use a small pointed
object to depress the test page switch located on the left side of the printer, as shown in
Figure 7-16. The test page should have a series of horizontal lines. The test page can use only
Tray 2 as the paper source, so ensure paper is loaded in Tray 2.
Figure 7-16 Test page switch
Formatter test page
To verify that the formatter is functioning, print a configuration page as follows:
1 Press to enter the MENUS.
2 Press to highlight INFORMATION.
3 Press to select INFORMATION.
4 Press to highlight PRINT CONFIGURATION.
5 Press to select PRINT CONFIGURATION.
To Next Page
Loading...
