ENWW Printer memory for the HP Color LaserJet 3700 series printer 73
Printer memory for the HP Color LaserJet 3700 series printer
The printer has three DIMM slots. The bottom slot is for the firmware DIMM.
Note For maximum flexibility in DIMM support, the formatter is designed with three 168-pin DIMM slots
and a fourth 100-pin DIMM slot.
Use these DIMM slots to upgrade the printer with the following items:
● more printer memory - DIMMs are available in 64, 128, and 256 MB
● flash memory DIMMs - available in 4 MB; unlike standard printer memory, flash DIMMs can be
used to permanently store downloaded items in the printer, even when the printer is off
● DIMM-based accessory fonts, macros, and patterns
● other DIMM-based printer languages and printer options
● memory expansion, which can support up to 448 MB of memory
You might want to add more memory to the printer if you often print complex graphics or PostScript
documents, or if you use many downloaded fonts. Additional memory also allows the printer to
print multiple, collated copies at the maximum speed.
Note Single in-line memory modules (SIMMs) used on previous HP LaserJet printers are not compatible
with this printer.
Note To order DIMMs, see Ordering parts in chapter 8.
Before ordering additional memory, see how much memory is currently installed by printing a
configuration page.
1 Press M
ENU to enter the MENUS.
2 Press to highlight INFORMATION.
3 Press to select INFORMATION.
4 Press to highlight PRINT CONFIGURATION.
5 Press to print the configuration page.
To Next Page
Loading...
