To Next PageTo Next Page
Need help?Do you have a question about the HP 3562A and is the answer not in the manual?
General| Type | Dynamic Signal Analyzer |
|---|---|
| Input Channels | 2 |
| Display | CRT |
| Total Harmonic Distortion | 0.01% |
| Amplitude Accuracy | ±0.15 dB |
| Phase Accuracy | ±0.5 degrees |
| FFT Resolution | 400 lines |
| Output Channels | 1 |
| Power Requirements | 100/120/220/240 V AC, 48-66 Hz |
| Dynamic Range | 80 dB |
