HP 3800 Series User Manual

IEEE 802.1v protocol VLANs
isolate select non-IPv4 protocols automatically into their own VLANs
MAC-based VLAN
provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs
Rapid Per-VLAN Spanning Tree (RPVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
HP switch meshing
dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent
Layer 3 routing
Layer 3 services
Loopback interface address
defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses, and prevents
server spoofing for UDP services such as DHCP
Layer 3 routing
Routing Information Protocol (RIP)
provides RIPv1 and RIPv2 routing
Static IP routing
provides manually configured routing for both IPv4 and IPv6 networks
OSPF
provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
Policy-based routing
makes routing decisions based on policies set by the network administrator
Border Gateway Protocol (BGP)
provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible
Security
Source-port filtering
allows only specified ports to communicate with each other
RADIUS/TACACS+
eases switch management security administration by using a password authentication server
Secure shell
encrypts all transmitted data for secure remote CLI access over IP networks
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout
prevents particular configured MAC addresses from connecting to the network
Detection of malicious attacks
monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks
is detected
QuickSpecs
HP 3800 Switch Series
Overview
DA - 14152 Worldwide — Version 15 — January 16, 2014 Page 5

HP 3800 Series Specifications

General

Ports	4 x SFP
Routing Protocol	RIP
Management	Web, CLI, SNMP
Form Factor	Rack-mountable
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing