Image is printed at an angle
Follow these steps if the image is printed at an angle:
1. Remove all paper from the paper tray.
2. Load the photo paper correctly in the paper tray.
3. Verify that the paper guide fits firmly against the edge of the paper.
Printout has an unwanted border
The following conditions can create an unwanted border.
For small photo paper
If the printout has an unwanted border, then try the following solutions:
• Align the print cartridges.
• Verify that the software application you are using supports borderless printing.
For small photo paper with a tear-off tab
If the border appears below the tear-off tab, then remove the tab.
HP Deskjet 3840 series printer User's Guide
77
To Next Page
Loading...