HP 4278A - Page 108

SPAR SOFTKEY LABEL: C-D/C-G (in 4COMPEN1
The SPAR command sets the parameter for standard compensation.
SYNTAX:
Control
Parameter
Description
1
2
Set the parameter to C-D.
Set the parameter to C-G.
Control
Parameter
Description
0
1
Make the std. compen. data invalid.
Make the std. compen. data valid.
SPAR
PARAMETER:
control
The control parameter choices are:
The default setting is SPAR1.
EXAMPLE:
OUTPUT 717;"SPAR2 'I Set the parameter to C-G.
STD SOFTKEY LABEL: STD ON/OFF (in 'COMPEN')
The STD command makes the standard compensation data valid or
invalid.
SYNTAX:
STD
PARAMETER:
control
The control parameter choices are:
The default setting is STDO.
EXAMPLE:
OUTPUT 717;"STD1"! Make the std. compen. data valid.
4-43