HP 4278A - Page 112

XOP
XSH
SOFTKEY LABEL: OPEN COMPEN (in `COMPEN')
The XOP command is used to get the open measurement data.
SYNTAX:
( XOP )
EXAMPLE:
OUTPUT 717rX0P"1 Measure the open data.
SOFTKEY LABEL: SHORT COMPEN (in `COMPEN')
The XSH command gets the short measurement data.
SYNTAX:
( XSH )8
EXAMPLE:
OUTPUT 717;"XSH"! Measure the short data.
XSTD SOFTKEY LABEL: STD COMPEN (in `COMPEN')
The XSTD command gets the std measurement data.
SYNTAX:
( XSTD )
EXAMPLE:
OUTPUT 717;"XSTD"! Measure the std measurement data.
XTMP SOFTKEY LABEL: TEMP COMPEN (in `COMPEN')
This XTMP command minimizes error that may occur in the analog
measurement circuit due to temperature change.
SYNTAX:
( XTMP ):*1
EXAMPLE:
OUTPUT 717;"XTIVIP"1 Minimize temperature induced error
4-47