INDEX
-A-
AOFFO OFFSET A OFF 4-14
AOFF1 OFFSET A ON 4-14
AUX° Auxiliary BIN OFF 4-14
AUX1 Auxiliary BIN ON 4-14
AVE= Averaging Rate 4-15
-8-
BIN1= LOW/HIGH Limit of BIN1 on the tolerance mode 4-15
BIN2= LOW/HIGH Limit of B11\12 on the tolerance mode 4-15
BIN3= LOW/HIGH Limit of BIN3 on the tolerance mode 4.15
BIN4= LOW/HIGH Limit of BIN4 on the tolerance mode 4-15
BINS= LOW/HIGH Limit of BINS on the tolerance mode 4-15
BIN6= LOW/HIGH Limit of BINS on the tolerance mode 4-15
B1N7= LOW/HIGH Limit of BIN7 on the tolerance mode 4-15
BINS= LOW/HIGH Limit of BINS on the tolerance mode 4-15
BIN9= LOW/HIGH Limit of BI N9 on the tolerance mode 4-15
BUM= Boundary Limit on the sequential mode 4-16
BOFFO OFFSET B OFF 4-16
BOFF1 OFFSET B ON 4-16
-C-
CABLO Cable Length (Om) 4-17
CABL1 Cable Length (1m) 4-17
CABL2 Cable Length (2m) 4.17
CCOU? BIN Count Query of the selected channel 4-18
CLIM Clear All Limits 4-19
CNO= Channel number selection 4-19
CNTO BIN Count OFF 4-20
CNT1 BIN Count ON 4-20
COMP° Comparator OFF 4-20
COMP1 Comparator ON 4-20
COUN? BIN Count Query 4-21
CSTD= Reference data (C) of the working std. capacitor 4-22
-D-
DATA? DATA OUTPUT query 4-22
DBINO Data Output (exclude the BIN number) 4-23
DBIN1 Data Output (include the BIN number) 4-23
DDIG4 Display Digit (4 digits) 4-24
DDIG5 Display Digit (5 digits) 4-24
DDIG6 Display Digit (6 digits) 4-24
DEND Data Output Continuous End 4-24
DFMT1 Data Transfer Format (ASCII Mode) 4-25
DFMT2 Data Transfer Format (BINARY 64bit Mode) 4-25
DPAG1 Display Page (MEASUREMENT PAGE) 4-27
DPAG2 Display Page (LIMIT PAGE) 4-27
DPAG3 Display Page (SORT PAGE) 4-27
DPAG4 Display Page (STATUS PAGE) 4-27
DST Data Output Continuous Start 4-28
DSTD= Reference data (0) of the working std. capacitor 4-28
DTIM= Delay Time 4-29
4-9
To Next Page
