HP 4278A - Page 75

DVAL1 Display Value (Measurement Value) 4-29
DVAL2 Display Value (Tolerance Value) 4.29
-E-
ERR? Error Message Query 4-30
-F-
FRE01 Measurement Frequency (1kHz) 4-30
FREQ2 Measurement Frequency (1MHz) 4-30
-G-
GSTD. Reference data (0) of the working std. capacitor 4-31
-H-
HIACO High Accuracy Mode OFF at 1MHz 4-31
HIAC1 High Accuracy Mode ON at 1 MHz 4-31
-I-
ITIM1 Integration Time (SHORT) 4-32
ITIM2 Integration Time (MEDIUM) 4-32
ITtM3 Integration Time (LONG) 4-32
-J-
-K-
-L-
LMOD1 Limit Mode (`)/0 Tolerance Mode) 4-32
LMOD2 Limit Mode (Absolute Tolerance Mode) 4-32
LMOD3 Limit Mode (Sequential Mode) 4-32
LOAD Load from the memory card 4-33
LPAR1 Limit Parameter (Cp-D) 4-33
LPAR2 Limit Parameter (Cp-Q) 4-33
LPAR3 Limit Parameter (Cp-G) 4-33
LPAR4 Limit Parameter (Cs-D) 4-33
LPAR5 Limit Parameter (Cs-0) 4-33
LPAR6 Limit Parameter (Cs-Rs) 4-33
-M-
MCOMO MULTI-COMPEN mode OFF 4-34
MCOM1 MULTI-COMPEN mode ON 4-34
MPAR1 Measurement Parameter (Cp-D) 4-34
MPAR2 Measurement Parameter (Cp-Q) 4-34
MPAR3 Measurement Parameter (Cp-G) 4-34
MPAR4 Measurement Parameter (Cs-D) 4-34
MPAR5 Measurement Parameter (Cs-0) 4-34
MPAR6 Measurement Parameter (Cs-Rs) 4-34
4-10