HP 4278A - Page 76

-N-
NOM- Nominal Value on the tolerance mode
-0-
4-35
OFFA= OFFSET A Data 4-35
OFFB= OFFSET B Data 4-36
OPENO OPEN Compensation OFF 4-36
OPEN1 OPEN Compensation ON 4.36
OPM? OPEN Compensation Measured Value Query 4-37
OSC= OSC LEVEL (V) 4-37
-P-
-0-
-R-
RAO AUTO RANGE at 1kHz 4-38
RA1 100pF at 1kHz 4-38
RA2 inF at 1 kHz 4-38
RA3 10nF at 1kHz 4-38
RA4 100nF at lkHz 4-38
RA5 14F at IkHz 4-38
RA6 101.1F at 1kHz 4-38
RA7 1004F at lkHz 4-38
RBO AUTO RANGE at 1MHz 4-39
RB1 1pF at 1MHz 4-39
RB2 2pF at 1MHz 4-39
RB3 4pF at 1MHz 4-39
RB4 8pF at 1MHz 4-39
RB5 16pF at 1MHz 4-39
RB6 32pF at 1MHz 4-39
RB7 64pF at 1MHz 4-39
RB8 128pF at 1MHz 4-39
RB9 256pF at 1MHz 4-39
RB10 512pF at 1MHz 4-39
RB11 1024pF at 1MHz 4-39
RC= Range Value at 1 MHz High Accuracy Mode 4-40
RCNT Count Reset 4-40
REVPO Reverse Parameter OFF 4-41
REVP1 Reverse Parameter ON 4-41
-S-
SHM? SHORT Compensation Measured Value Query 4-41
SHORO SHORT Calibration OFF 4-42
SHOR1 SHORT Calibration ON 4-42
SLIM= LOW/HIGH Limit of Secondary Parameter 4-42
SPAR1 Standard Parameter (C-D) 4-43
SPAR2 Standard Parameter (C-G) 4-43
STDO STANDARD Compensation OFF 4-43
STD1 STANDARD Compensation ON 4-43
STM? STANDARD Compensation Measured Value Query 4-44
STOR Store the 4278A's controls to the memory card 4-44
STR? STANDARD Compensation Reference Value Query 4-45
4-11