-T-
TRIG1 Trigger Mode (Internal) 4.45
TRIG2 Trigger Mode (External) 4-45
TRIG3 Trigger Mode (Manual) 4-45
-U-
-V-
VMONO Value Monitor OFF 4-46
VMON1 Value Monitor (OPEN Measurement Value) 4-46
VMON2 Value Monitor (SHORT Measurement Value) 4-46
VMON3 Value Monitor (STANDARD Measurement Value) 4.46
VMON4 Value Monitor (STANDARD Reference Value) 4-46
VMON5 Value Monitor (OFFSET Reference Value) 4-46
VMON6 Value Monitor (Limit Nominal Value) 4-46
-W-
-X-
XOP Measure OPEN Compensation data 4.47
XSH Measure SHORT Compensation data 4-47
XSTD Measure STANDARD Compensation data 4-47
XTMP Execute Temperature Compensation 4-47
-Y-
-Z-
-OTHERS-
*CLS Clear Status Byte 4.48
*lDN? Identification Query 4-48
*LRN? Learn Device Setup Query 4-49
*OPT? Option Identification Query 4-50
*RST Reset the instrument 4.50
*SRE Mask the status byte 4-51
*SRE? *SRE resister (masking number) Query 4-52
*STI3? Read the status resister 4-52
*TRG Trigger command 4-52
4.12
To Next Page
