HP 4278A - Page 92

DFMT (1) When data is returned without the BIN NO,
(cont.) the data byte loop is repeated twice.
Control
Parameter
Description
1
Set the display format to MEAS PAGE.
2 Set the display format to LIMIT PAGE.
3 Set the display format to SORT PAGE.
4
Set the display format to STATUS PAGE.
(2) When data is returned with the BIN NO, the data byte loop is
repeated tree times.
EXAMPLE:
OUTPUT 717;"DFMT21 Set to BINARY format.
DPAG SOFTKEY LABEL: MEAS/LIMIT/SORT/STATUS PAGE (in ‘DISPLY PAGE')
The DPAG command sets the display page format.
SYNTAX:
DPAGf )1 control
PARAMETER:
The control parameter choices are:
The default setting is DPAGI.
EXAMPLE:
OUTPUT 717;"DPAG21Set to the LIMIT PAGE.
4-27