HP 4284A - Page 138

Auxliary Bin ON/OFF
Description
When the secondary parameters aect the sorting results, the limits
for the secondary parameter can be set in 2nd LOW/HIGH elds.
So there are three patterns for the sorting area of the secondary
parameter.
When the secondary parameter limits are not specied on the
LIMIT TABLE SETUP page.
Devices will be sorted according to primary parameter comparison
results.
When the secondary parameter limits are set and A
UX BIN are set
to OFF.
Only devices with secondary limits are sorted by the primary
parameter result. Devices not within the secondary parameter
limits are sorted OUT OF BINS even if the device's primary
parameter is within limits.
MEAS SETUP Menu 4-41