CORRECTION page
This sample program sets the setting controls on the
CORRECTION
page after the correction data have already b een stored.
10 ASSIGN @Meter TO 717
20 REMOTE @Meter
30 OUTPUT @Meter;"DISP:PAGE CSET"
40 OUTPUT @Meter;"CORR:OPEN STAT ON"
50 OUTPUT @Meter;"CORR:SHOR:STAT ON"
60 OUTPUT @Meter;"CORR:LOAD:STAT ON"
70 OUTPUT @Meter;"CORR:LENG 1"
80 OUTPUT @Meter;"CORR:METH MULT"
90 OUTPUT @Meter;"CORR:USE 10"
100 OUTPUT @Meter;"CORR:LOAD:TYPE CPD"
110 OUTPUT @Meter;"SPOT1:STAT ON"
120 OUTPUT @Meter;"SPOT2:STAT ON"
130 OUTPUT @Meter;"SPOT3:STAT ON"
140 END
Figure 7-21. CORRECTION page
Remote Control 7-33
To Next Page
